PS Picture Frame Profile Extruder Production Line

Product Description

 

Product Description

PS Picture / Photo Frame / Moulding Profile Extrusion Line

PS frame moulding machine can make plastic photo frame which can replace the traditional wooden frame, the costs are much lower and the quality is much better than wood. The main raw materials are recycled PS, mixing with little some other additives in different formulas, this can get different quality profiles for various application, which can save more materials cost in production.

However, Feininger PS photo frame moulding production line is different from traditional chemical foaming. It adopts supercritical CO2 physical foaming, which greatly reduces the product density and makes the product more environmentally friendly.

Other Uses of the PS Photo Frames

The advantage of buying a PS photo frame making line is that you can produce other types of profiles including:

Polystyrene Foamed Skirting Profile: It is utilized in interior decoration as a baseboard to cover the gap between the wall and floor.

Mirror frame: The PS foam frame can act as an excellent item to hold mirrors even in bathrooms since it's waterproof. And it will also enhance the mirror's aesthetics in addition to protecting it.

Model	Extruder Type	Length/ Diameter	Foam output (kg/hr)	Blowing Agent (Gas)	Thickness of Profile (mm)	Width of Profile (mm)
CS-75T	TE75	22-26	20-80	100% CO2	5-15mm	25-150mm
CS-85T	TE85	22-24	40-150		8-20mm	40-220mm
CS-95T	TE95	22-24	60-250		8-20mm	65-300mm

 

Production Process

1. Add the raw materials to be processed in a certain proportion and pour it into the mixer.
2. After regular mixing and homogenizing, they are transported to a quantitative feeder bin by a feeder.
3. The feeder is evenly fed to the outlet of the main extruder according to the addition amount set by the customer.
4. The raw material is conveyed to the heat exchanger by the high-temperature screw of the main engine, and the heat is
homogenized.
5. Then the material is conveyed to the extrusion equipment after the die, in which carbon dioxide foaming agent is injected quantitatively.
6. The material model of high-temperature products made by mould is formed after cooling into a two-stage shaping jacket.
7. Then the material is cooled through a water channel.
8. The products are drawn to a tractor and cut with a fixed length.
9. Finally, it is formed into a qualified product and packaged and sold.

Final Product

 

Why Choose Us

1. Environment Protection + 100% Safe

Feininger PS baseboard making machines are different from traditional chemical foaming. Our baseboard extrusion line adopts supercritical CO2 physical foaming, which greatly reduces the product density and makes the product more environmentally friendly.

 

2. High Performance Cost Ratio
 

With our PS skirting board extrusion machine, you can manufacture polystyrene cornice moulding, PS photo frame, PS baseboard, etc.

 

Successful Cases

 

Company Profile

FAQ

Question 1.

How many meters produce per minute of the xps cornice machine?
Different densign and size, the capacity is different, for 45mm width cornice, about 15-20meters per minute, for 58mm width cornice, about 12-15 meters per minute, for 130mm width cornice, about 6-8 meters per minutes.

Question 2.
 

How many people need for the whole production line?
2 workers needed for the whole line. Our line is automatic, including automatic feeding system! the manual process is for packing.

Question 3.
 

How many densign could be produce with this machine?
We have 20 standard moulds. You also could produce any densign your market required just by providing your moulds design, then we make it for you!

Question 4.
 

Which foaming agent (gas)could be used in this line?
100% CO2 SUPPORTED! In China, only we can do this technology!
 

Question 5.
 

What's the density of the cornice this machine produced?
The normal density is 60-80KG per cubic meters.
 

Question 6.
 

What's the raw material?
GPPS (General Purpose Polystyrene).
 

Question 7.
 

Whether the cornice could be anti-flaming or not? Whether the cornice could be antioxidant or not?
Yes! It could be anti-flaming and antioxidant by mixed special material.
 

Question 8.
 

Do you have and supply the raw material? If not, could you find the raw material for us?
Yes, we could find material supplier for you, for the whole production line, it need about 1x40GP + 1x20ft container for shipping, and we could take some material for you, about 2 to 3 Tons .
 

Question 9.
 

How about the shipping, packing and payment ?
It need about 1x40GP + 1x20ft container ,standard seaworthy packing. The payment is by TT .